How to Clean and Lube a Motorcycle Chain – Easy Guide for All Riders

A clean and well-lubed motorcycle chain keeps your ride smooth and extends its life. If your bike has no double stand, you’ll need a paddock stand to lift the rear wheel for easy cleaning. Here’s a simple step-by-step guide.

What You Need:

✔ Paddock stand (if no double stand)
✔ Chain cleaner
✔ Rust cleaner
✔ Chain lube
✔ Chain cleaner brush
✔ Microfiber cloth
✔ Cleaner gloves

Step 1: Use a Paddock Stand (If No Double Stand)

If your bike has no double stand, place it on a paddock stand. This lifts the rear wheel, making it easy to rotate and clean the chain properly.

Step 2: Wear Cleaner Gloves

Put on cleaner gloves to keep your hands free from grease and chemicals.

Step 3: Apply Chain Cleaner

Spray chain cleaner evenly on the motorcycle chain to loosen dirt, grime, and old oil.

Step 4: Use Rust Cleaner for Extra Protection

If you notice rust, apply rust cleaner on the affected areas and let it sit for a few minutes. Wipe it off with a microfiber cloth.

Step 5: Scrub with a Chain Cleaner Brush

Use a chain cleaner brush to scrub all sides of the chain, removing stubborn dirt and rust.

Step 6: Wipe with a Microfiber Cloth

Use a microfiber cloth to dry the chain and remove any leftover cleaner.

Step 7: Apply Chain Lube

Spray chain lube evenly while slowly rotating the rear wheel. The paddock stand makes this much easier!

Step 8: Let It Set

Allow the chain lube to sit for 10–15 minutes before riding to prevent splatter.

Why a Paddock Stand is Essential

If your bike has no double stand, cleaning and lubing your motorcycle chain becomes difficult. A paddock stand makes the job effortless, allowing you to rotate the rear wheel freely and reach every part of the chain.

Regular chain cleaning with rust cleaner and chain lube keeps your bike running smoothly and prevents wear. Get a paddock stand today for easier maintenance and a longer-lasting chain! ?✨